There’s one message I’ve learned to dread: “I’m here, I think? Which building is it?” Picture it arriving at 10:40 p.m. from someone dragging a big suitcase down a dark residential lane. They’re tired, and they’re only a few doors away from the right building.

Guests can reach the station and still struggle with the final walk, from the station exit to your front door. A single Google Maps pin and a hopeful “see you soon!” often aren’t enough to get them through that stretch.

TL;DR

  • Questions about the final walk from the station to the door come up again and again in our day-to-day guest chats.
  • Many urban areas in Japan use block-based residential addressing. Addresses identify blocks rather than positions along a named street, and residence numbers generally follow the perimeter of each block. A correct address alone often won’t get a guest to the right door.
  • Good directions start from a specific station exit, use a photo at every decision point, and end with a photo of the actual entrance.
  • Give guests a separate Japanese-language address card for taxi drivers, and night-time photos if you get late arrivals.
  • Directions for each property can be reused as long as you keep them current, which makes them a good fit for automation. A chatbot grounded in your own directions can answer “I’m at exit B2, now what?” right away.

Why Do Guests Get Lost Near Japanese Rentals?

Guests get lost because the address doesn’t map neatly onto a street, and the last part of the walk often goes down unnamed lanes. Many urban areas in Japan use block-based residential addressing (街区方式の住居表示). There, an address written as 〇丁目〇番〇号 gives the chōme, then the block number, then the residence number. Residence numbers generally run clockwise around the perimeter of each block and are assigned according to where a building’s entrance faces the street, as Shinjuku City explains in 住居表示でわかりやすい街づくりを. They don’t form a single sequence along a named street, so guests may still need a photo of the entrance.

Then there are the stations. A large Tokyo or Osaka station can have a dozen or more exits, labeled things like A3, B1 or “East Exit.” Come out of the wrong one and you can be a few hundred meters off before you’ve taken a step. Smaller residential buildings often have no visible name in English, or a name plate guests walk straight past. Add a late arrival, jet lag and luggage, and a five-minute walk can take twenty minutes and end with an anxious message.

Questions about the final walk come up again and again in our day-to-day guest chats. They’re usually not about the trains. They’re about the walk from the exit to the door.

What Should Good Directions Include?

Good directions start from one named station exit and walk the guest to the door one decision point at a time, with a photo for each. Here’s the structure we use now:

  1. The exact exit. “Take Exit A2 (signs say ‘A2 / ○○ Park’),” not “go to ○○ Station.” If the station has a sensible alternative exit, for example one with an elevator for heavy luggage, mention it too, along with its opening hours.
  2. A photo looking out from that exit. This shows guests where they’re standing and which way to face, which no written description does as well.
  3. Each turn, anchored to a landmark. “Turn left at the 7-Eleven” beats “walk 150 m north.” Convenience stores, vending machines or a distinctive shop sign all work. Pick the most permanent landmarks you can.
  4. A photo at each turn, taken from the guest’s point of view and in the direction they’ll be walking.
  5. The building and the entrance. A wide shot of the building, then a close-up of the actual door or gate. If the entrance is round the side, or behind a bike rack, show that.
  6. One map pin, checked by hand. Drop the pin on the entrance yourself and test it on a phone. Don’t rely on whatever the address geocodes to.

Keep the directions current. Add a last-checked date, and check exit and elevator hours and any closure notices. Retake photos when a landmark changes. Some exits have limited hours, and that matters for late arrivals. Tokyo Metro, for example, lists the elevator-only exit toward the Marunouchi Building at Tokyo Station as operating from the first train until 24:00 (バリアフリー設備 | 東京駅/M17 | 東京メトロ).

Keep it short, too. Many guests read this on a phone screen while walking, so a short instruction plus a photo works much better than a paragraph.

How Do You Handle Late-Night and Taxi Arrivals?

For late arrivals, give guests night-time photos and a Japanese address card they can show a taxi driver. Daytime photos can be useless after dark. The bright shop sign you used as a landmark may be closed and shuttered, and a lane that looks obvious at noon can be pitch black at 11 p.m. If a fair share of your guests arrive late, take a second set of photos at night.

Taxis cause their own problems. Many guests from the airport or a major terminal take a taxi for the last leg, and handing the driver an English address doesn’t always work. We send a simple card with three things: the full address in Japanese, the building name in Japanese, and a nearby landmark the driver will recognize. Guests can show it on their phone. A simple card is quick to prepare and saves a lot of confused pointing.

When Should You Send the Directions?

Send directions before arrival, then again in a form guests can find quickly when they’re actually standing at the exit. We include them in the pre-arrival message a couple of days ahead. That’s when guests plan their route, and it’s also when they tell us about a late flight or a lot of luggage. The same directions sit in the house manual and on a single web page we can link to again.

The second copy matters more than you’d think. Sending the link again on the day saves guests from scrolling back through a message thread while they’re standing at the station.

Where Does Automation Help?

Directions for each property can be reused as long as they’re kept current, which makes them good material for a chatbot. When we built the guest chatbot for our guesthouses, we grounded it in each property’s own information, including the exit-by-exit route. Now when someone writes “I’m at the wrong exit” or “the 7-Eleven is on my right, is that correct?”, they get an answer straight away, even at 11 p.m.

That doesn’t remove the need for good directions. The bot can only be as clear and as up to date as what you’ve written down. The work is in the photos, the landmark-by-landmark route and keeping both current. Automation just makes sure guests get those answers the moment they need them.

FAQ

Q: Is a Google Maps pin enough?

Usually not on its own. A pin placed automatically from the address can land on the wrong side of a block or on the wrong building. Google lets you request a fix for a wrong pin location (Fix a missing address or wrong pin location — Google Maps Help), but don’t wait for that: place the pin on the entrance yourself, test it, and pair it with exit-specific photo directions.

Q: How many photos should the directions have?

One per decision point, plus the station exit and the entrance. For a property near a station, five to eight photos is a reasonable starting point, but let the decision points on the route set the actual count. If a photo doesn’t help the guest make a choice, cut it.

Q: Should I use video instead of photos?

A short walking video can work well as an extra, but photos are easier to check quickly on a phone. Compress the photos to reduce data use, and let guests save the guide before they travel. Use the photo version as your main set of directions and the video as an optional extra.